444 35 46 (444 EKİN)
MIT, one of the most known and preferred brands of Turkey, has been continuing creating new ideas and developments to improve plate heat exchanger sector.
Resmi Facebook hayran sayfamızı beğenin ve gelişmelerden ilk sizin haberiniz olsun!
Müşteri destek hattımız ile siz değerli müşterilerimize 7/24 hizmet sunmaktayız..
Cooling Rolling Press Oil:In bloomeries, used oil becomes hot and loses its lubricant function and so production performance goes down. To keep the bloomery oil at an optimum temperature, MIT Plate Heat Exchangers can be used. With cooling towers, chiller circuits and simple automations which are connected to heat exchangers’ seconder circuits, rolling press oil maintains the desired temperatures and your company works with maximum efficiency.
Cooling Borax Oil:Borax oil is one of the corner stones of industry, it is in the heart of the machining system. Quality and temperature of borax oil is very important to get maximum performance from the cutting edge and to reach maximum cutter life. If cooling tower or chiller is used with MIT Plate Heat Exchangers which enable you to keep borax oil in an optimum temperature, you can get maximum efficiency.Cooling Group Cycle:In today's world, cooling towers are the most common cooling source to meet the cooling demand in industrial facilities. These towers can be either open or close and in both, MIT Plate Heat Exchangers are used. In open towers, some amount of solid particles mixes with water so this water can not be sent back to system that will be cooled directly. By using MIT Plate Heat Exchangers between the system and the open tower, the system is seperated as two circuits and MIT Plate Heat Exchangers take the whole risk. In due course, if the heat exchanger gets dirty, it can be cleaned easily and so the system can work with the same performance again.Chiller Group Circuit:Generally, it is not enough to use cooling tower in such situations that low temperature water needed. That's why chillers are preferred in that kind of applications. Because of that chiller groups are very sensitive , expensive devices and it is really hard to fix them, in a bad situation, big damages may occur. MIT Heat Exchangers seperate the system and chiller circuit and so make them work free from each other, their only duty will be to make heat transfer between them.Waste Heat Recycle:In industrial facilities,there are a lot of heat sources that go in vain such as rotten steam, hot water that returns without washing the fabric. At the same time,there are some applications which require heat like utility hot water production and office heating. If you use MIT Plate Heat Exchangers to transfer avaliable heat sources to heat needed areas, you do not waste your heat and you do not have to pay extra cost for your heat requirement as well. Nowadays, the competition in production has been greatly increasing.The most important factor about relieving companies is to decrease expenses. Energy expenses is one of the most biggest components, it is very significant for eveybody. So wasting it is unacceptable. If we make a rough calculation, a heat exchanger used for heat recycle will amortize itself in 3-6 months and start to make company more profitable
E-Bülten aboneliğe kayıt yaptırarak, web site güncellemelerinden ilk sen haberdar ol!..